Back

Music system

How to power on the stereo, choose an input, and stream from your phone.

The music system is a stereo receiver / amplifier wired to the speakers in the room. Most modern receivers work the same way — these instructions are deliberately generic. Replace with your model’s specifics.

▶️ Power on/off

  • Press the Power button on the front panel or the remote.
  • An indicator light shows when the unit is on.

🎚️ Volume

  • Use the large volume dial on the front (or the remote).
  • Raise it slowly — most receivers have plenty of power and can get loud quickly.

🎛️ Selecting an input

Use the Input Selector to choose:

  • Bluetooth — stream from your phone (see below)
  • Tuner — FM/AM radio
  • CD / Aux — analog inputs

The current input is shown on the front display.

🔵 Bluetooth — pairing your phone

  1. Turn the Input Selector to Bluetooth (or press BT on the remote).
  2. The display will show “Pairing”.
  3. On your phone, open Bluetooth settings and choose [your receiver’s name].
  4. Wait a few seconds — when the display shows your phone’s name, you’re connected.
  5. Play music as usual — it’ll come through the speakers.

Next time, if the receiver is on and Bluetooth selected, your phone reconnects automatically.

🔇 If there’s no sound

  • Check the unit isn’t muted (Mute button on the remote).
  • Check the right input is selected.
  • Check the speakers are switched on at the receiver.